16686-12V Heavy Duty Circuit Tester

Descriptions:

With CE Approval.
Check on 6 and 12V systems. To indicate whether there is an electrical potential at any low voltage point in the system. By using the pointed contact tip to pierce insulation on cables, it will also indicate if current is present. This can be helpful when tracing faults or add cable to a circuit.

Features:

  • Probe length: Approximately 88mm / 3.46"
  • 5-feet flexible rubber wire with spring relief.
  • Tough plastic handle lights up when circuit is in good condition.
  • The painted probe is insulated to prevent accidental short circuiting.

Specifications:

VOLTAGE MEASUREMENT
VOLTAGE RANGE 6-12V
LENGTH
PROBE 88mm / 3.46"         
COIL CORD 5-feet
INSTRUCTIONS
  1. This quality circuit tester has an impact resistant transparent handle, incorporating with a test light, 150cm (5-feet) of heavy duty insulated cable and a crocodile (earth) clip.
  2. The crocodile (earth) clip is clamped to a suitable earth point and the contact tip is placed onto the part to be tested.  If current is present, the test light will be glowed.