7650Oxygen Sensor Tester and Simulator
This device is designed to test and to simulate 1V Zirconia and 1V/5V Titania type oxygen sensors. The simulation can help user to exam the function of the ECU; moreover, it can analyze the type of connection wire.
- Testing 1 ~ 4 wires (with/without heater) oxygen sensor (1V Zirconia, 1V/5V Titania).
- Connection wires analysis (ground, open, heater, ECU power).
- Check the ECU response to the sensor by simulating rich/lean signals.
- LED indication of oxygen sensor signal switching and low power indication.
- With wire piercing clip (easy for connection), 5 minutes auto-shut down, proper sealed control panel, high strength housing.